1. Visit our energy efficiency testing labs in Dongguan, China
GTG Group energy efficiency testing laboratory for lighting products equipped with state-of-the-art testing equipment and can perform comprehensive energy efficiency testing.
2. More about the lab
It’s important to note that the list below is not exhaustive. Wanted to know if your product is within our testing scope? Please 填寫我們的簡短表格,我們的專家將很樂意為您提供進一步幫助。
Light Source:
- LED tube;
- Fluorescent lamp;
- LED bulb;
Fixed luminaires:
- Ceiling lamp;
- Wall lamp;
- Wall washer;
- Pendant light;
- Frame lamp;
- Bay light;
- Track light;
- Street light;
- ……
Recessed luminaires:
- Downlight;
- Panel light;
- Spot light;
- Underground lamp;
- Underwater lamp;
- Linear strip light;
- ……
Portable luminaires:
- Table lamp;
- Floor lamp;
- Handlamp;
- ……
Others:
- Floodlight;
- Emergency lamp;
- Night light;
- Advertising light;
- Mirror light;
- ……
LED Drivers:
- Independent LED driver;
- Built in LED driver;
- Integrated LED driver;
- …
LED Modules:
- RGB LED module;
- Full color LED module;
- Single color LED module;
- Dual color LED module;
- Low voltage LED module;
- High voltage LED module;
- …
- LM-79 integrating sphere program
- Photometric and electrical parameter
- LM-80 (Lumen maintenance)
- LM-82
- LM-84
- Spatial photometric distribution (Light distribution curve, Beam angle)
- Spatial chromaticity distribution
- Light source flicker test
- Light source warm-up time
- Light source starting time
- TM-21 lifetime estimation
- TM-28 lifetime estimation
- TM-33
- Aging test
- IEC TR 62778
- IEC/EN 62471 light emission test
- …
(EU) 2019/2020 | Ecodesign requirements for light sources and separate control gears pursuant to Directive 2009/125/EC of the European Parliament and of the Council |
(EU) 2019/2015 | Supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council |
2021 No. 1095 | The ecodesign for energy-related products and energy information (lighting products) |
IES LM-79 | Optical and electrical measurements of solid state lighting products |
ANSI/IES LM-80 | Measurement of luminous flux and color maintenance for LED packages, arrays, and modules |
IES LM-82 | Characterization of LED light engines and LED lamps for electrical and photometric properties as a function of temperature |
IES LM-84 | Measuring optical radiation maintenance of LED lamps, light engines, and luminaires |
IEEE Std 1789 | IEEE recommended practices for modulating current in high-brightness leds for mitigating health risks to viewers |
NEMA 77 | Measurement and recommended limits for flicker and stroboscopic effect in solid state LED lamps |
IES TM-21 | Projecting long term lumen maintenance of LED light sources |
ENERGY STAR® Program Requirements for Lamps (Light Bulbs) | Product specification for ENERGY STAR certified Lamps |
ENERGY STAR® Program Requirements for Luminaires | Product specification for ENERGY STAR certified Luminaires |
CEC-140-2021-002 | 加州法規第 20 條 |
CEC-400-2018-021-CMF | Building energy efficiency standards title 24, part 6, and associated administrative regulations in part 1 |
10 CFR 430 Appendix BB to Subpart B | Energy conservation program for consumer products |
GB/T 7922 | Method of measuring color of light sources |
GB/T 9468 | General requirements for the photometry and goniophotometry of luminaries |
GB/T 34446 | Performance requirements of fixed LED luminaires for general lighting |
GB/T 30413 | Performance requirements for recessed LED luminaires |
GB/T 24907 | LED lamps for road lighting performance specifications |
GB/T 34452 | Performance requirements of portable LED luminaires for general lighting |
GB 37478 | Minimum allowable values of energy efficiency and energy efficiency grades of LED luminaires for road and tunnel lighting |
GB 30255 | Minimum allowable values of energy efficiency and energy efficiency grades of LED products for indoor lighting |
GB/T 29296 | Self-ballasted LED reflector lamps – Performance requirements |
GB/T 29295 | Test methods of performance of self-ballasted LED reflector lamps |
GB/T 29294 | Performance requirements for LED downlights |
GB/T 29293 | Measurement methods of the performance for LED downlights |
GB/T 24824 | Measurement methods of LED modules for general lighting |
GB/T 31831 | Technical requirements for application of LED indoor lighting |
CQC 3155 | Energy conservation certification criteria for lighting products used in classrooms in schools and kindergarten |
GB/T 24825 IEC 62384 EN IEC 62384 BS EN IEC 62384 | DC or AC supplied electronic controlgear for LED modules—Performance specifications |
GB/T 24908 IEC 62612+A1+A2 EN 62612+A11+A1+A2 BS EN 62612+A1+A2 | Performance standards for non-directional self-ballasted LED general lighting. |
GB/T 31897.1 IEC 62722-1 EN 62722-1 BS EN 62722-1 | Luminaire performance – Part 1: General requirements |
GB/T 31897.201 IEC 62722-2-1 EN 62722-2-1 BS EN 62722-2-1 | Luminaire performance – Part 2-1: Particular requirements for LED luminaires |
GB/T 24823 IEC 62717+A1+A2 EN 62717+A2 BS EN 62717+A2 | LED modules for general lighting – Performance requirements |
3. One-stop solution
By working with GTG Group, you will enjoy the convenience of completing all of your tests (EMC, RF, wireless, safety, energy efficiency, environmental, durability, performance, chemical and other tests) and receive certification for your product from a single accredited lab. You will also eliminate the headaches of using multiple labs, delays in logistics, and shipping costs. Contact us today!
- Electromagnetic Compatibility (EMC) Testing Laboratory
- Safety Testing Laboratory for Power Supplies
- Safety Testing Laboratory for Lighting Products
- Energy Efficiency Testing Laboratory for Power Supplies
- Energy Efficiency Testing Laboratory for Lighting Products
- Performance Testing Laboratory for Lighting Products
- Battery Testing Laboratory for Consumer Electronics
- Power Battery Testing Laboratory
對標準解釋、標準適用性或國家特定要求的產品測試和認證有疑問嗎?
不確定哪些標準適用於您的產品?我們來談談吧!我們的專家 7*24 待命。
13 年來,GTG 集團已幫助數千家組織進入全球市場並獲得國際認可!
© 2012-2024 GTG 組。版權所有。