Language

Reliability Testing

GTG Group laboratories offers accredited reliability testing for a wide range of products and global markets.

1. Reliability testing

Reliability testing is a crucial step in the product development process. It involves subjecting a product to various tests and conditions to measure its ability to perform consistently over time. By identifying potential weaknesses or failure points, manufacturers can make necessary improvements before releasing their products into the market. A reliable product not only enhances customer satisfaction but also builds trust in your brand.

2. Global market access

We perform rigorous and full reliability testings to ensure that the product meets the standards set by the regulatory bodies of the country where it will be sold. Our lab equipment, staffing and consulting for test plan design can be fully customized to meet your specific needs.

There are several types of reliability testing, including:

  1. Environmental testing: this involves testing products in extreme conditions to ensure that they can withstand different climates, such as temperature, humidity, and vibration to determine its resistance to these conditions;
  2. Durability (mechanical) testing: this involves testing the durability of products by simulating real-life scenarios;
  3. Electrical testing: this involves testing the electrical safety and performance of products.

Not sure which type of reliability testing is required for your product? Please fill out our short form, our expert will be glad to assist further.

Below is a list of reliability testing standards we’re capable of. And our team is always available for any general inquiries, or technical discussions regarding the following reliability testing standards. Not sure which standard apply to your product? Please fill out our short form, our expert will be glad to assist further.

  • GJB;
  • GB;
  • GB/T;
  • IEC;
  • ISO;
  • EN;
  • MIL-STD;
  • SAE;
  • ASTM;
  • ISTA;
  • JIS;
  • IPC;
  • JEDEC;
  • GM;
  • NISSAN;

GTG Group assists clients through every step of the testing process. Fill out our short form and start taking advantages of our deep industry expertise and extensive technical knowledge to help expedite the process today!

  • High/low temperature (-100°C to 300°C);
  • Temperature and humidity (0°C to 100°C; <5%RH to 100%RH);
  • Power Temperature Cycling (PTC) (change rate>10 min);
  • Thermal cycling (-70°C to 150°C);
  • Thermal shock (cold -65°C and 0°C; warm 60°C and 200°C);
  • Highly accelerated stress test (HAST)/Corrosion testing (between 105°C and 143°C; between 75 and 100%RH);
  • Highly accelerated life testing (HALT);
  • Highly accelerated stress testing (HASS);
  • Ingress protection test (water and dust ingress protection, also called IP testing);
  • Altitude test;
  • Salt mist/salt spray test;
  • Shock test;
  • IK impact test;
  • Wind test;
  • Impact test;
  • Vibration & resonance test;
  • Mechanical shock test (product fragility test);
  • Drop test;
  • Tumble test (repeated free fall test);

3. Tour our reliability testing laboratories

Click the pictures to view more! If you're interested in visiting our laboratories on site, please fill out our short form, we'd be glad to arrange the hotel and everything!

4. Why choose us?

Founded in 2012, GTG Group is an independent ISO/IEC 17025 accredited product testing and certification services provider in China, providing comprehensive testing and regulatory certifications obtaining services for a wide range of products. Our goal is to certify your products and ensure their compliance with regulatory standards in order to help you access worldwide markets.

By working with GTG Group, you will enjoy the convenience of completing all of your tests (reliability, durability, environmental, performance, safety, EMC, RF, wireless, energy efficiency, chemical and other tests) and receive certification for your product from a single accredited lab. You will also eliminate the headaches of using multiple labs, delays in logistics, and shipping costs. Contact us today!

One of the most significant advantages of working with GTG Group is that we perform real test and are responsible for the end user. This is essential because it avoid risks and provides peace of mind to businesses and individuals who use the products. We have worked with some of the world’s leading businesses, and our services are highly regarded by our clients. When you choose the GTG Group for testing and certification, you can be confident that you are working with a trusted and reliable partner.

Our testing and test reports are globally recognized and accepted by regulatory agencies, ensuring that your products meet the necessary standards and regulations. GTG Group’s subsidiaries are accredited by local and international certification bodies that includes IECEE, UL, A2LA, NVLAP, ITS (Intertek), KTC, TÜV, Eurofins, CNAS, CMA, CQC. Our accreditation is a testament to our commitment to providing high-quality testing services that meet industry standards. Check all accreditation documents in this page.

Our facilities are with enough space to perform every type of test separately and have room for all your equipment as well as plenty of workspace around it. GTG Group covers a testing area of 30,000 square meters and have more reliability testing labs, durability testing labs, environmental testing labs, performance testing labs, safety testing labs, EMC testing labs, RF testing labs, wireless testing labs, energy efficiency testing labs and chemical testing labs than our peers. 

Furthermore, our standardized and normalized testing process allows us to deliver accurate and reliable testing results within a short timeframe. That’s why our turnaround time is among the fastest in the industry, ensuring that our clients get their products to the market as soon as possible.

GTG Group invest heavily in modern testing equipment to ensure that the testing process is accurate and reliable. And we can do what other labs can’t. Our 10-meter semi-anechoic chamber allows us to perform EMC testing recognized by Taiwan and South Korea. Our facilities are with enough space to perform every type of test separately and have room for all your equipment as well as plenty of workspace around it. We can also provide free pre-compliance tesing service to help detect and resolve potential design flaws early in the process to reduce design costs and accelerate market launch. We promise no risk or any obligation!

We understand that every product is different, and the cost is a significant factor when it comes to product development. GTG Group strive to provide affordable testing solutions without compromising on quality. Our team of experts will work closely with you to understand your product’s specific needs and design testing solutions that meet your requirements and ensures compliance with regulatory standards. This means that you can get the testing you need, without paying for services that you don’t, ensuring that our clients always get the best value for their money.

At the GTG Group, customer service is a top priority. We work closely with our clients to understand their specific needs and requirements. Our team of experts is always available to answer any questions or concerns you may have, and we are committed to providing you with a seamless and hassle-free testing and certification experience.

GTG Group is committed to continuous improvement and staying up-to-date with the latest industry trends and technologies. We invest in training our team of experts and upgrading our testing facilities to ensure that we provide the best testing solutions to our clients.

 
Click the pictures to view more! If you're interested in visiting our laboratories on site, please fill out our short form, we'd be glad to arrange the hotel and everything!

Ready to get a free quote?

We offer competitive pricing for our testing and certification services. And our team is always available for any general inquiries, or technical discussions regarding compliance testing/certification. Speak to a GTG Group expert by filling out our short form.
Need help or have a question?

Have questions about product testing and certification in reference to standards interpretations, applicability of standards, or country-specific requirements?

Not sure what standard or standards apply to your product? Let's talk! Our experts are 24*7 on call.

Accreditation

View our comprehensive testing scope, standards we cover, and see our full accreditation here.

Ready to get a free quote?

We offer ompetitive pricing for our testing and certification services. And our team is always available for any general inquiries, or technical discussions regarding compliance testing/certification.

Contact us on 0086-18188898539 to talk to our team, or request a free quote by filling out our short form below.
Get a free quote in minutes!

GTG Group have helped thousands of organizations access the global markets with international approval over 13 years!

© 2012-2024 GTG Group. All rights reserved.

© 2012-2024 GTG Group. All rights reserved.