ETS-Lindgren and Anritsu partner on Wi-Fi 7 test

Sources: Our guidance and/or articles are written in part based on publicly available information, and our own practical experience relating to product testing, compliance and certification. These are some of the primary sources we use:

ETS-Lindgren is gearing up to optimize their products using the MT8862A Wireless Connectivity Test Set from Anritsu to capitalize on the revolutionary advancements brought forth by Wi-Fi 7 (IEEE802.11be).

As one of the first-to-market Wi-Fi 7 systems available, users now have a proven test system for performance verification testing of wireless devices in accordance with IEEE Standard 802.11be.

IEEE 802.11be, Wi-Fi 7 is a significant leap forward in wireless technology, introducing features such as 320 MHz channels, Multi-link Operation (MLO), 4K QAM, 512 Compressed Block Ack, and Multiple RUs to a single STA. These innovations translate into tangible benefits, including two times increase in throughput, deterministic latency, enhanced efficiency, greater reliability, a 20% boost in transmission rates, reduced transmission overhead, and improved spectral efficiency.

Anritsu offers the MT8862A Wireless Connectivity Test Set to evaluate RF TRX characteristics of Wi-Fi 7 devices. This test set uses data-link layer communication protocols to control the signal per data rate, allowing RF evaluations to be performed at all major WLAN standards, including Wi-Fi 7, at all data rates. This capability is essential because WLAN signal quality characteristics vary with each data rate.

ETS-Lindgren offers a diverse range of test chambers within its AMS family; standout models such as AMS-8050 and AMS-8900 are strategically positioned to facilitate thorough testing of Wi-Fi 7 capabilities in wireless devices. Working with Anritsu to leverage the groundbreaking capabilities of Wi-Fi 7, ETS-Lindgren is proactively aligning itself to provide forward-looking test services and products. The utilization of the MT8862A Anritsu Wireless Connectivity Test Set for Wi-Fi 7 OTA testing, specifically for TRP and TIS, is a key highlight. ETS-Lindgren is committed to assisting manufacturers in certifying and optimizing the performance of devices and networks in accordance with the new Wi-Fi 7 standards.

Why the biggest brands choose GTG Group?

GTG Group is a leading provider of wireless testing and certification services in China. We offers a range of services to clients in the wireless industry, including RF testing, EMC testing, SAR testing, Bluetooth testing, and Wi-Fi testing. These services are important for ensuring that wireless devices meet industry standards and are safe for use by consumers. If you are in the wireless industry and looking for quality testing and certification services, GTG Group is the company to choose.

(1) Perform real testing

One of the most significant advantages of working with GTG Group is that we perform real testing and are responsible for the end customer. This is essential because it avoid risks and provides peace of mind to businesses and individuals who use the products.

(2) Comprehensive testing services

GTG Group offers comprehensive wireless testing services that cover a wide range of wireless technologies, including Wi-Fi, Bluetooth, Zigbee, and cellular technologies. Our testing services cover the entire product lifecycle, from design and development to certification and market launch.

(3) State-of-the-art equipment

EMC chamber is a specially designed room that is used to test electronic devices for electromagnetic compatibility (EMC). The chamber is designed to be completely isolated from external electromagnetic fields to ensure they do not cause interference with other electronic devices.

Our state-of-the-art EMC test laboratory includes a 10m semi-anechoic chamber (built by ETS-Lindgren), a radiated immunity test chamber, conducted emissions testing system, and other conducted immunity testing systems, ensuring that testing is performed accurately and efficiently.

What makes it stand out:

5-meter large diameter turntable can test substantial EUTs.
10-meter chamber measurement results and data are accepted by Taiwan and South Korea.
Eligible for FCC 3 meter Class A & B (3 meter and 10 meter test methods) facility filing.
Full suite of testing covering EMC/EMI emissions and immunity.
Fully automated measurement & reporting software ensuring the accuracy of data acquisition, as well as fast test report generation.

(4) EMC/EMI testing capabilities

Our EMC/EMI testing laboratories are capable of testing frequency ranges of up to 120GHz and uniform field levels of 30 V/m.

Test Item	Test Level	Typical Standard
Radiated Emissions	9KHz to 120 Ghz	CISPR 11/EN55011, CISPR 16/EN55016, CISPR 22/EN55022, CISPR32, EN 55032, EN 60601-1-2, FCC Part 15/Part 18, ANSI C63.4 Parts 15 & 18, EN 50147-2, ICES-003, VCCI, Bellcore GR-1089, SAE J551
Conducted Emissions	100-230VAC, 9KHz – 30MHz	CISPR22, CISPR32, EN 55022 EN 55032, EN 60601-1-2, FCC Part 15/Part 18, ICES-003, VCCI
Harmonics and Flickers	100-230VAC, 16A	EN 61000-3-2, EN 61000-3-3
Radiated Immunity	Up to 30V, 0.15MHz to 80MHz	CISPR24, EN 55024, EN 60601-1-2, IEC 61000-4-3/EN 61000-4-3, ENV 50140, SAE J-1113
Conducted Immunity	Up to 30V, 0.15MHz to 80MHz	CISPR24, EN 55024, EN 60601-1-2, EN 61000-4-3
Electrostatic Discharge	30kV	CISPR24, EN 55024, EN 60601-1-2, EN 61000-4-2
EFT/B Immunity	6kV	CISPR24, EN 55024, EN 60601-1-2, EN 61000-4-4
Surge Immunity	6kV	CISPR24, EN 55024, EN 60601-1-2, EN 61000-4-5
Interruption and Dips	100-230VAC	CISPR24, EN 55024, EN 60601-1-2, EN 61000-4-11
Power Magnetic Fields	50/60Hz, 100A/m	CISPR24, EN 55024, EN 60601-1-2, EN 61000-4-8

(5) Regulatory compliance

GTG Group has extensive experience working with a variety of wireless device manufacturers, from startups to multinational corporations. We understand the unique challenges that each company faces and can help companies navigate the complex regulatory landscape, ensuring that your wireless devices comply with international standards and regulations, such as FCC, IC, CE, and ETSI. We have a team of experts who are well-versed in regulatory compliance and can guide you through the certification process. Additionally, regulatory compliance can help avoid costly fines and legal fees.

(6) Testing for interoperability

One of the most important aspects of interoperability testing is ensuring that devices can communicate using the same protocols and standards. This requires a thorough understanding of the various wireless protocols and standards, including Wi-Fi, Bluetooth, and NFC. Testing also involves ensuring that devices can communicate using different versions of these protocols, as well as different security standards.

With years of experience in the industry, GTG Group has developed a comprehensive testing methodology that can assist you in testing your devices for interoperability with other devices in the market. Our testing services cover a wide range of devices, including smartphones, tablets, laptops, smart home devices, IoT devices, medical devices and other wireless devices. We can also test wireless infrastructure, such as base stations and antennas.

(7) Performance testing

GTG Group can assist you in testing the performance of your wireless devices under various scenarios, such as low signal strength, high traffic, and interference.

(8) RF testing

GTG Group can assist you in testing the RF performance of your wireless devices, and their ability to transmit and receive radio signals, including signal strength, interference, and range. If a device fails RF testing, GTG Group will work closely with the client to identify the issue and provide recommendations for resolving it. During the process, the device may need to be modified or retested to ensure compliance with industry standards.

(9) Pre-compliance testing

Pre-compliance testing can ensure that wireless devices meet industry standards before they are submitted for certification, which can save you time and money in the certification process.

(10) Antenna testing

GTG Group provide near-field testing service for wireless device's antennas. We uses a range of advanced equipment, such as anechoic chambers and far-field ranges, to measure the antenna's radiation pattern, gain, efficiency, and impedance. Our highly trained professionals can ensure you that the testing is accurate and reliable.

(11) Environmental testing

GTG Group can assist you in testing your wireless devices under different environmental conditions, such as temperature, humidity, and vibration.

(12) Field testing

Our team of experts includes engineers, developers, and testers who are all highly skilled in their respective areas. They work together to assist you in conducting field testing for your wireless devices, and they can provide valuable insights into how your devices perform in the field and how to improve its performance.

(13) Customized testing services

Our team of experts can work with you to develop a testing plan that meets your unique requirements. We also offer flexible pricing options and can work within the budgets of our clients to ensure that they receive the best value for their money.

(14) Faster time to market

Our testing services can help you avoid costly delays and ensure that your devices are ready for market launch. GTG Group standardized testing process and state-of-the-art testing equipment allows us to deliver accurate and reliable testing results within a short timeframe. By partnering with GTG Group, you can reduce your time to market by ensuring that your wireless devices comply with international standards and regulations.

Contact us today to learn more about our WiFi testing & certification services, and how we can help your business with valuable insights provided by our team of experts.