1. SAA certification
SAA stands for "Standards Australia Approvals," which is an Australian certification mark indicating that a product has been tested and verified to meet certain safety and quality standards. It is commonly associated with electrical and electronic products, ensuring that they comply with the regulations set by the Australian authorities. SAA certificates are accepted in all of Australia and New Zealand.
2. SAA certification mark
3. More about SAA certification
Below are some of typical products we specialize in. It’s important to note that the list below is not exhaustive. Not sure if your product requires SAA certification? Please fill out our short form, our expert will be glad to assist further.
- Appliance Coupler;
- Bayonet Lamp Holder;
- Bayonet Lamp Holder Adapter;
- Drag Line Board;
- Screw Socket;
- Miniature Circuit Breaker;
- Power Adapter/Charger;
- Power Plug/Outlet;
- Power Cord;
- Wall Switch;
- Leakage Current Device;
- TV Receiver;
- Massage Equipment;
- Clothes Dryer;
- Washing Machine;
- Water Bed Heater;
- Storage Water Heater;
- Electric Heating Pad;
- Electric Blanket;
- Small Kitchen Appliances;
- Electric Stove;
- Dishwasher;
- Electric Fan;
- Vacuum Cleaner;
- Refrigerator/Freezer;
- Liquid Heater;
- Range Hood;
- Electric Stove;
- Microwave Oven;
- Toaster;
- Portable Cooker;
- Fluorescent Lamp Ballast;
- Fluorescent Light Starter;
- Hair Dryer;
- Hair Appliances;
- Handheld Lamp;
- Portable Lamp;
- Handheld Searchlight;
- Therapeutic Lamps;
- LED Module;
- Projector;
- Electric Welding Machine
- Electric Fence Exciter;
- Floor Polishing Machine;
- Floor Scrubbing Machine;
- Pruning Shears;
- Electric Insect Killer or Electrocution Trap;
- Lawn Mowers;
- Sewing Machine;
- Immersion Heater;
- Electric Shaver;
- Electric Hair Clipper;
- Room Heater;
- Portable Power Tools;
- Electric Iron;
- …
Below is a list of safety testing standards we’re capable of. And our team is always available for any general inquiries, or technical discussions regarding the following safety testing standards. Not sure what standard or standards apply to your product? Please fill out our short form, our expert will be glad to assist further.
Power Supplies:
- For Information Technology Equipment (ITE) & Audiovisual (AV) Products: AS/NZS 62368.1;
- For Lighting Products: AS/NZS 61347.1; AS/NZS 61347.2.13;
- For Household Appliances: AS/NZS 60335.1; AS/NZS 60335.2.29;
- For Medical Products: AS/NZS 60601;
- Industrial Power Supplies (Transformer): AS/NZS 61558.1; AS/NZS 61558.2.16.
Terminal Products:
- ITE & AV Products: AS/NZS 62368.1;
- Lighting Products: AS/NZS 60598.1; AS/NZS 60598.2.XX;
- Household Appliances: AS/NZS 60335.1; AS/NZS 60335.2.XX;
- Medical Products: AS/NZS 60601.1;
- Industrial Power Supplies (Transformer): AS/NZS 61558.1; AS/NZS 61558.2.XX;
- Electric Tools: AS/NZS 60745.1; AS/NZS 60745.2.XX.
Batteries:
- Batteries for Consumer Electronics: IEC 62133; IEC 60086; IEC 61960;
- Power Batteries: IEC 62660-1; IEC 62660-2; IEC 62660-3; IEC 62619; IEC 62620.
PLEV & EPAC Bicycles:
- Personal Light Electric Vehicles (PLEV) & Electrically Power Assisted Cycles (EPAC Bicycles): IEC 15194; IEC 17128.
GTG Group assists clients through every step of the testing process. Fill out our short form and start taking advantages of our deep industry expertise and extensive technical knowledge to help expedite the process today!
Required documentation varies depending on the products. For detailed required documentation on specific product, please fill out our short form, our expert will be glad to assist you further. Below are some of typical required documentation for METI filing:
- Application Form;
- CB Certificate and Test Report;
- Product Label;
- Block Diagram;
- PCB Layout;
- User Manual;
- Constructional Data Form (CDF);
- Bill of Materials (BOM);
- Difference List;
- …
Below are the general filing steps for METI filing. Have questions or not sure where to start? Please fill out our short form, our expert will be glad to assist further.
- Fill out the application form;
- Perform test;
- Make improvements on the test sample if the test fails;
- Issue the test report;
- Report evaluation;
- Issue the certificate.
The SAA certification is valid for 5 years.
4. Factory inspection
There are two types of SAA certification marks: formal certification mark and standard mark. Formal certification mark is only responsible for the sample while the standard mark require factory inspection.
5. Price and lead time
You will never pay for services that you don’t need! GTG Group provides a customized quote which are tailored to each client's needs and budget. Furthermore, you will receive the SAA certification within 3 to 4 weeks according to our past experience, much shorter than the average industry time..
However, the cost and the lead time of testing and certification varies depending on the product complexity and the testing requirements. GTG Group provides free consultation to assess your needs and provide advice on how to get started with compliance. Contact us today by filling out our short form!
6. Why choose us?
Founded in 2012, GTG Group is an independent ISO/IEC 17025 accredited product testing and certification services provider in China, providing comprehensive testing and regulatory certifications obtaining services for a wide range of products. Our goal is to certify your products and ensure their compliance with regulatory standards in order to help you access worldwide markets.
