1. FCC testing & certification
這 Federal Communication Commission (FCC) is the independent agency of the United States government that regulates the radiation standards of electronic devices. Nearly all products emitting radio frequency energy must be tested by FCC listed or accredited lab and certified by the FCC for EMC/Telecom compliance.
GTG Group is an accredited laboratory for FCC testing with extensive experience in radio and wireless approvals for the North American market. Working with a laboratory with deep industry expertise and extensive technical knowledge can help you avoid common mistakes that can delay your certification.
2. FCC mark
3. FCC ID, SDoC, and products covered
Applicable to mobile communications equipment and other products capable of radio communication, such as 2G cell phones, 3G cell phones, 3.5G cell phones, DECT cell phones (1.8GHz, 1.9GHz), Bluetooth devices, tablet computer, wireless keyboard, wireless microphones, remote controls, walkie-talkies, and other low powered wireless devices.
Not sure if your product requires FCC ID? Please 填寫我們的簡短表格，我們的專家將很樂意為您提供進一步的協助。
For general electronic products without wireless function, such as monitors, lamps, power supplies, home appliances…
Not sure if your product requires FCC SDoC? Please 填寫我們的簡短表格，我們的專家將很樂意為您提供進一步的協助。
It’s important to note that the list above is not exhaustive, and the requirement for FCC certification can vary based on the specific features and capabilities of a device. If a device emits radio frequency radiation or uses wireless technology, it’s advisable for manufacturers or importers to consult with the FCC or a qualified testing laboratory to determine whether FCC certification is necessary for their particular product.
GTG Group’s testing laboratories are FCC-recognized, and our team is always available for any general inquiries, or technical discussions regarding compliance testing/certification. Speak to a GTG Group expert by 填寫我們的簡短表格 今天！
4. More about FCC certification
FCC ID:
- Conducted Spurious Emissions
- Radiated Spurious Testing
- Conducted Emissions Band Edge Compliance
- Maximum Peak Conducted Output Power
- 20dB Bandwidth, 99% Occupied Bandwidth and Carrier Frequency Separation
- Channel Spacing
- Number of Hop Channels
- Time of Occupancy (Dwell Time)
- Antenna Testing Requirements
- …
FCC SDoC:
- Conducted Emissions (CE)
- Radiated Emissions (RE)
- …
Below is a list of EMC testing standards we’re capable of. And our team is always available for any general inquiries, or technical discussions regarding the following EMC testing standards. Not sure which standard applies to your product? Please 填寫我們的簡短表格，我們的專家將很樂意為您提供進一步的協助。
North America Standards (United States & Canada)：
- General Standards: FCC Part 15B; ICES-003;
- ITE (Information Technology Equipment), Audiovisual (AV) Products: FCC Part 15B;
- Wireless Devices: FCC Part 15C/15E; FCC Part 22/24/27;
- Lighting Products: FCC Part 15B; FCC Part 18; ICES-005;
- Energy Storage Products: FCC Part 15B;
- Household Appliances: FCC Part 15B;
- Industrial, Scientific and Medical Products: FCC Part 18; ICES-001.
CISPR/IEC Standards：
- 通用標準：IEC 61000-6-1； IEC 61000-6-2； IEC 61000-6-3； IEC 61000-6-4；
- ITE, AV Products: CISPR 32; CISPR 35; IEC 61000-3-2; IEC 61000-3-3;
- 照明產品：CISPR 15； IEC 61547； IEC 61000-3-2； IEC 61000-3-3；
- 家用電器：CISPR 14.1； CISPR 14.2； IEC 61000-3-2； IEC 61000-3-3；
- 工業、科學和醫療產品：CISPR 11； IEC 61000-3-2； IEC 61000-3-3； IEC 61000-4 系列。
GTG Group assists clients through every step of the EMC testing process. 填寫我們的簡短表格 並開始利用我們深厚的行業專業知識和廣泛的技術知識來幫助加快這一進程！
所需的文件因產品而異。有關特定產品所需的詳細文檔，請 填寫我們的簡短表格, our expert will be glad to assist you further. Below are some of typical documentation required for FCC ID and FCC SDoC:
FCC ID:
(1) The responsible party (manufacturer or importer) shall test the product in a FCC-approved accredited test lab and obtain a test report.
(2) Fill out the TCB Form 731 according to test results.
(3) In addition to the above, the responsible party is also required to provide relevant documentation and information about product, including:
- Technical document
- Schematics
- User manual
- FCC confidentiality agreement, authorization letter
- Product nameplate
- …
FCC SDoC:
(1) The responsible party of the product (manufacturer or importer) shall test the product in a testing facility and obtain a test report.
(2) Once the product passed the tests, affix corresponding labels and warnings on the product, and declare in the user manual that it complies with the FCC standard.
(3) Provide U.S. local supplier declaration of conformity documents
GTG Group assists clients through every step of the FCC testing process. 填寫我們的簡短表格 並開始利用我們深厚的行業專業知識和廣泛的技術知識來幫助加快這一進程！
- 射頻定頻樣機一台、普通樣機一台；
- 定頻樣機與多頻道產品進行測試；
- 如果是單頻通道樣機，請提供連續發射樣機。
5. 價格和交貨時間
You will never pay for services that you don’t need! GTG Group provides a customized quote which are tailored to each client's needs and budget. Furthermore, you will receive FCC certification within 1 to 2 weeks according to our past experiences.
然而，測試和認證的成本和交付時間根據產品的複雜性和測試要求而有所不同。 GTG 集團提供免費諮詢來評估您的需求並提供如何開始合規的建議。今天透過以下方式聯絡我們 填寫我們的簡短表格！
6. A2LA accreditation documents
When you choose the GTG Group for testing and certification, you can be confident that you are working with a trusted and reliable partner.
Our laboratory is accredited by A2LA. This means we're authorized to perform FCC testing and write test reports accordingly. Testing scope we specialize in: information technology (IT) products, audiovisual (AV) products, lighting products, small home appliances, power supplies, electric personal transportation vehicles, batteries...
7. 為什麼選擇我們？
GTG集團成立於2012年，是中國獨立的ISO/IEC 17025認可的產品測試和認證服務提供商，為多種產品提供全面的測試和監管認證服務。我們的目標是認證您的產品並確保其符合監管標準，以幫助您進入全球市場。
