1. Visit our energy efficiency testing labs in Dongguan, China
GTG Group energy efficiency testing laboratory for lighting products equipped with state-of-the-art testing equipment and can perform comprehensive energy efficiency testing.
2. 연구실에 대한 추가 정보
It’s important to note that the list below is not exhaustive. Wanted to know if your product is within our testing scope? Please 간단한 양식을 작성해 주세요, our expert will be glad to assist you further.
광원:
- LED tube;
- Fluorescent lamp;
- LED bulb;
Fixed luminaires:
- Ceiling lamp;
- Wall lamp;
- Wall washer;
- Pendant light;
- Frame lamp;
- Bay light;
- Track light;
- Street light;
- …
매립형 등기구:
- Downlight;
- Panel light;
- Spot light;
- Underground lamp;
- Underwater lamp;
- Linear strip light;
- …
Portable luminaires:
- Table lamp;
- Floor lamp;
- Handlamp;
- …
Others:
- Floodlight;
- Emergency lamp;
- Night light;
- Advertising light;
- Mirror light;
- …
LED Drivers:
- Independent LED driver;
- Built in LED driver;
- Integrated LED driver;
- …
LED Modules:
- RGB LED module;
- Full color LED module;
- Single color LED module;
- Dual color LED module;
- Low voltage LED module;
- High voltage LED module;
- …
- LM-79 integrating sphere program
- Photometric and electrical parameter
- LM-80 (Lumen maintenance)
- LM-82
- LM-84
- Spatial photometric distribution (Light distribution curve, Beam angle)
- Spatial chromaticity distribution
- Light source flicker test
- Light source warm-up time
- Light source starting time
- TM-21 lifetime estimation
- TM-28 lifetime estimation
- TM-33
- Aging test
- IEC TR 62778
- IEC/EN 62471 light emission test
- …
(EU) 2019/2020 | Ecodesign requirements for light sources and separate control gears pursuant to Directive 2009/125/EC of the European Parliament and of the Council |
(EU) 2019/2015 | Supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council |
2021 No. 1095 | The ecodesign for energy-related products and energy information (lighting products) |
IES LM-79 | Optical and electrical measurements of solid state lighting products |
ANSI/IES LM-80 | Measurement of luminous flux and color maintenance for LED packages, arrays, and modules |
IES LM-82 | Characterization of LED light engines and LED lamps for electrical and photometric properties as a function of temperature |
IES LM-84 | Measuring optical radiation maintenance of LED lamps, light engines, and luminaires |
IEEE Std 1789 | IEEE recommended practices for modulating current in high-brightness leds for mitigating health risks to viewers |
NEMA 77 | Measurement and recommended limits for flicker and stroboscopic effect in solid state LED lamps |
IES TM-21 | Projecting long term lumen maintenance of LED light sources |
ENERGY STAR® Program Requirements for Lamps (Light Bulbs) | Product specification for ENERGY STAR certified Lamps |
ENERGY STAR® Program Requirements for Luminaires | Product specification for ENERGY STAR certified Luminaires |
CEC-140-2021-002 | 캘리포니아 규정집 제목 20 |
CEC-400-2018-021-CMF | Building energy efficiency standards title 24, part 6, and associated administrative regulations in part 1 |
10 CFR 430 Appendix BB to Subpart B | Energy conservation program for consumer products |
GB/T 7922 | Method of measuring color of light sources |
GB/T 9468 | General requirements for the photometry and goniophotometry of luminaries |
GB/T 34446 | Performance requirements of fixed LED luminaires for general lighting |
GB/T 30413 | Performance requirements for recessed LED luminaires |
GB/T 24907 | LED lamps for road lighting performance specifications |
GB/T 34452 | Performance requirements of portable LED luminaires for general lighting |
GB 37478 | Minimum allowable values of energy efficiency and energy efficiency grades of LED luminaires for road and tunnel lighting |
GB 30255 | Minimum allowable values of energy efficiency and energy efficiency grades of LED products for indoor lighting |
GB/T 29296 | Self-ballasted LED reflector lamps – Performance requirements |
GB/T 29295 | Test methods of performance of self-ballasted LED reflector lamps |
GB/T 29294 | Performance requirements for LED downlights |
GB/T 29293 | Measurement methods of the performance for LED downlights |
GB/T 24824 | Measurement methods of LED modules for general lighting |
GB/T 31831 | Technical requirements for application of LED indoor lighting |
CQC 3155 | Energy conservation certification criteria for lighting products used in classrooms in schools and kindergarten |
GB/T 24825 IEC 62384 EN IEC 62384 BS EN IEC 62384 | DC or AC supplied electronic controlgear for LED modules—Performance specifications |
GB/T 24908 IEC 62612+A1+A2 EN 62612+A11+A1+A2 BS EN 62612+A1+A2 | Performance standards for non-directional self-ballasted LED general lighting. |
GB/T 31897.1 IEC 62722-1 EN 62722-1 BS EN 62722-1 | Luminaire performance – Part 1: General requirements |
GB/T 31897.201 IEC 62722-2-1 EN 62722-2-1 BS EN 62722-2-1 | Luminaire performance – Part 2-1: Particular requirements for LED luminaires |
GB/T 24823 IEC 62717+A1+A2 EN 62717+A2 BS EN 62717+A2 | LED modules for general lighting – Performance requirements |
3. 원스톱 솔루션
GTG 그룹과 협력하면 모든 테스트(EMC, RF, 무선, 안전, 에너지 효율성, 환경, 내구성, 성능, 화학 및 기타 테스트)를 편리하게 완료하고 공인된 단일 공인 기관으로부터 제품 인증을 받을 수 있습니다. 랩. 또한 여러 실험실을 사용하는 데 따른 골치 아픈 일, 물류 지연 및 배송 비용을 없앨 수 있습니다. 오늘 저희에게 연락하십시오!
표준 해석, 표준 적용 가능성 또는 국가별 요구 사항과 관련하여 제품 테스트 및 인증에 대해 질문이 있습니까?
귀하의 제품에 어떤 표준이 적용되는지 잘 모르시나요? 얘기하자! 우리 전문가들은 연중무휴 24시간 대기하고 있습니다.
GTG 그룹은 13년 동안 수천 개의 조직이 국제 승인을 받아 글로벌 시장에 접근하도록 도왔습니다!
© 2012-2024 GTG 그룹. 판권 소유.