1. BIS certification
BIS stands for Bureau of Indian Standards, which is the national standards body of India. BIS certification is a mandatory requirement for certain products that are sold in India. The BIS certification process involves testing the product in a BIS-approved laboratory and obtaining a certificate of conformity.
2. More about BIS certification
BIS will issue the certificate only after the initial inspection and evaluation of factory quality management system and sample inspection are confirmed to be satisfactory. The certification is supervised by the factory’s quality management system after completion of the certification. BIS will test samples taken from factories and markets to determine if products comply with Indian standards.
製品により検査項目が異なります。特定の製品の安全性試験項目については、 短いフォームに記入してください弊社の専門家が喜んでお手伝いいたします。以下は、電源の典型的なテスト項目の一部です。
- 温度上昇試験;
- Dielectric withstand test;
- 故障テスト;
- 絶縁抵抗 (IR) テスト;
- Creepage distance and clearances
- …
以下は、当社が実施できる安全性試験基準のリストです。また、私たちのチームは、以下の安全性試験規格に関する一般的な質問や技術的な議論にいつでも対応します。あなたの製品にどの規格が適用されるかわからないですか?お願いします 短いフォームに記入してください弊社の専門家が喜んでお手伝いいたします。
- 情報技術 (IT) 製品: IS 13252 (Part 1):2010;
- Audiovisual products: IS 616:2010.
GTG グループは、テスト プロセスのあらゆる段階でクライアントを支援します。 短いフォームに記入してください そして、当社の深い業界専門知識と広範な技術知識を活用して、今すぐプロセスを迅速化してください。
必要書類は製品によって異なります。特定の製品に関する詳細な必要書類については、以下を参照してください。 短いフォームに記入してください, our expert will be glad to assist you further. Below are some of typical required documentation for BIS certification:
- 申請フォーム;
- Appointment form proving local agent in India or documents proving the presence of the manufacturer’s office in India and a letter of authorization from the Reserve Bank of India;
- Rregistration certificate of the company;
- Process flow diagram showing the entire manufacturing process of the product (from raw material to finished product);
- Quality control system, including quality manual, quality control plan, test plan;
- Provide additional details of the product or system certification (if available);
- Details of components or raw materials used in the manufacture of the product (if available);
- List of manufacturing machines;
- List of testing equipment;
- Product design drawings;
- Details of qualifications and experience of laboratory supervisors, technician and QC staff;
- Test reports from accredited independent laboratories or the factory’s own laboratories;
- Layout of the factory showing clearly the main manufacturing machines and laboratories;
- Traffic diagrams from the nearest airport or railway station to the factory and the detailed transportation route from India to the factory;
- Bill of exchange;
- …
Below are the general application steps for achieving BIS certificate. Have questions or not sure where to start? Please 短いフォームに記入してください弊社の専門家が喜んでお手伝いいたします。
- Fill out the application form. Foreign manufacturers are generally required to use a dedicated application form and prepare the relevant documentation to apply to BIS headquarters in New Delhi.
- Review. BIS will review the application documents submitted by the applicant and record the application if it is complete. The applicant shall pay the corresponding processing fee.
- Initial factory inspection: BIS will send a team of not more than 2 officials to inspect the factory. The applicant shall bear the travel and visa expenses of the officials to the factory and the corresponding inspection fees.
- Issue the certificate. A certificate will be issued to the applicant if the initial inspection and test results are satisfactory and the applicant agrees to perform a BIS approved inspection and testing program and pay the BIS logo fee. The certificate is valid for 1 year and the holder shall pay for the logo and the certificate annually.
- Post-certification supervision. BIS supervises the quality of its certified products through regular supervision of the holder and unannounced inspections and testing of samples from factories and markets. The certificate may be renewed if the test samples taken from the factory or market by the regular inspections meet the requirements by the inspection and independent testing results of that factory. The renewal fee is Rs. 500 for renewal of the certificate by submitting the dedicated form to the BIS. The holder of the certificate shall also bear the cost of sample inspection.
- BIS certification is generally valid for one year, and applicants must pay an annual fee for renewal. An extension may be applied for before the expiration date, at this time you need to submit an extension application and pay the application fee and annual fee;
- BIS accepts CB test reports issued by valid certification bodies;
- Certification processes will be faster if the applicant meets the following conditions:
- Fill in the manufacturing plan in the factory address line in the application form;
- The factory has all test equipment conforming to relevant Indian standards;
- Product is certified to meet relevant Indian standards (tested in own laboratory or other independent laboratory according to India standards and submitted with test report).
4. 工場検査
Factory inspection is required before issuing BIS certification.
5. 価格と納期
You will never pay for services that you don’t need! GTG Group provides a customized quote which are tailored to each client's needs and budget. Furthermore, we can expedite the certification process by leveraging modern technologies that ensure you receive the BIS certification in a reasonably short time frame, faster than the average industry time.
ただし、テストと認証のコストとリードタイムは、製品の複雑さとテスト要件によって異なります。 GTG グループでは、お客様のニーズを評価し、コンプライアンスを開始する方法についてのアドバイスを提供する無料のコンサルティングを提供しています。今すぐご連絡ください。 短いフォームに記入してください！
6. なぜ私たちを選んだのですか?
2012 年に設立された GTG グループは、中国における独立した ISO/IEC 17025 認定製品試験および認証サービス プロバイダーであり、幅広い製品に対して包括的な試験および規制認証取得サービスを提供しています。私たちの目標は、お客様が世界市場にアクセスできるよう、お客様の製品を認証し、規制基準への準拠を保証することです。
