1. PSE certification
The PSE certification is a mandatory safety and EMC approval for electrical products sold on the Japanese market. The applicable law is the DENAN Act (Electrical Appliance and Material Safety Act) of Japan. The Japanese Ministry of Economy, Trade and Industry (METI) is the responsible authority for the PSE Certification.
457 product categories have been designated pursuant to the DENAN act (as of December 2018). Under the Act, electrical products are divided into two categories: Specified Electrical Products (totally 116 products) and Non-Specified Electrical Products (totally 341 products). Specified Electrical Products must display the diamond PSE mark while Non-Specified Electrical Products must be marked with the circle PSE mark.
Not sure if your product requires PSE mark, or which type of PSE mark is requested? Please remplissez notre court formulaire, notre expert se fera un plaisir de vous aider davantage.
2. Two types of PSE mark
3. More about PSE certification
Below is a list of electrical products we specialize in. It’s important to note that the list below is not exhaustive. Not sure if your product requires PSE certification? Please remplissez notre court formulaire, notre expert se fera un plaisir de vous aider davantage.
- Specified Electrical Products: DC power supply units, power switches & plugs, electric water heaters, power cords & plugs, transformers for household appliances…
- Non-Specified Electrical Products: electric blankets, electric steamers, electric hair curler, electric toasters, microwave ovens, hair humidifiers, refrigerators, electric blender, electric egg cookers, electric hair dryers, electric humidifiers, projectors, washing machines, incandescent light bulb, fluorescent lamps, table lamps, decorative lamps, advertising lamps, lithium batteries, LED lighting products…
Vous trouverez ci-dessous une liste de normes de tests de sécurité dont nous sommes capables. Et notre équipe est toujours disponible pour toute demande générale ou discussion technique concernant les normes de tests de sécurité suivantes. Vous ne savez pas quelle(s) norme(s) s'appliquent à votre produit ? S'il te plaît remplissez notre court formulaire, notre expert se fera un plaisir de vous aider davantage.
Japan Standards:
- Power supplies for Information Technology Equipment (ITE): 别表八; 别表十二; J 60950-1; J 62368-1;
- Power supplies for Audiovisual (AV) products: 别表八; 别表十二; J 60065; J 62368-1;
- Power supplies for lighting products: 别表八; 别表十二; J 61347-1; J 61347-2-13;
- Power supplies for household appliances: 别表八; 别表十二; J 60335-1; J 60335-2-29;
- Industrial power supplies (transformers): 别表八; 别表十二; J 61558-1; J 61558-2-16;
- ITE: 别表八; 别表十二; J 60950-1; J 62368-1;
- AV products: 别表八; 别表十二; J 60065; J 62368-1;
- Lighting products: 别表八; 别表十二; J 60598-1; J 60598-2-XX;
- Household appliances: 别表八; 别表十二; J 60335-1; J 60335-2-XX;
- Medical products: 别表八;
- Industrial products (transformers): 别表八; 别表十二; J 61558-1; J 61558-2-XX;
- Electric tools: 别表八; 别表十二; J 60745-1; J 60745-2-XX;
- Batteries for consumer electronics: JIS C 8712; JIS C 8714; 别表九; 别表十二; JIS C 62133-1; JIS C 62133-2;
- Power batteries: 别表十二; JIS C 8715-1; JIS C 8715-23.
IEC Standards:
- Power supplies for ITE: IEC 60950-1; IEC 62368-1;
- Power supplies for AV products: IEC 60065; IEC 62368-1;
- Power supplies for lighting products: IEC 61347-1; IEC 61347-2-13;
- Power supplies for household appliances: IEC 60335-1; IEC 60335-2-29;
- Power supplies for medical products: IEC 60601-1;
- Industrial power supplies (transformers): IEC 61558-1; IEC 61558-2-16;
- ITE: IEC 60950-1; IEC 62368-1;
- AV products: IEC 60065; IEC 62368-1
- Lighting products: IEC 60598-1; IEC 60598-2-XX;
- Household appliances: IEC 60335-1; IEC 60335-2-XX;
- Medical products: IEC 60601-1;
- Industrial products (transformers): IEC 61558-1; IEC 61558-2-XX;
- Electric tools: IEC 60745-1; IEC 60745-2-XX;
- Batteries for consumer electronics: IEC 62133; IEC 60086; IEC 61960;
- Power batteries: IEC 62660-1; IEC 62660-2; IEC 62660-3; IEC 62619; IEC 62620;
- Véhicules électriques légers personnels (PLEV) & Electrically Power Assisted Cycles (EPAC Bicycles): IEC 15194; IEC 17128.
Below is a list of EMC testing standards we’re capable of. And our team is always available for any general inquiries, or technical discussions regarding the following EMC testing standards. Not sure what standard or standards apply to your product? Please remplissez notre court formulaire, notre expert se fera un plaisir de vous aider davantage.
Japan Standards:
- ITE (Information Technology Equipment), Audiovisual (AV) Products: J 55032 (H29);
- Lighting Products: J 55015 (H29);
- Household Appliances: J 55014;
- Industrial, Scientific and Medical Products: J 55011.
CISPR/IEC Standards:
- General Standards: IEC 61000-6-1; IEC 61000-6-2; IEC 61000-6-3; IEC 61000-6-4;
- ITE, AV Products: CISPR 32; CISPR 35; IEC 61000-3-2; IEC 61000-3-3;
- Lighting Products: CISPR 15; IEC 61547; IEC 61000-3-2; IEC 61000-3-3;
- Household Appliances: CISPR 14.1; CISPR 14.2; IEC 61000-3-2; IEC 61000-3-3;
- CISPR 11; IEC 61000-3-2; IEC 61000-3-3; IEC 61000-4 Series.
Le matériel requis varie en fonction des produits. Pour obtenir des informations détaillées sur les matériaux requis sur un produit spécifique, veuillez remplissez notre court formulaire, notre expert se fera un plaisir de vous aider davantage. Vous trouverez ci-dessous quelques matériaux typiques requis pour les alimentations :
- Remplissez le formulaire de candidature;
- CB test certificate and CB test report
- Schéma;
- PCB layout related to safety regulations;
- Specification of transformer and coil;
- Critical Component List (CCL) and their certifications;
- Constructional Data Form (CDF);
- User manuals or assembly manuals in Japanese;
- Nameplates and warning signs in Japanese (with the PSE mark and the name of notifying suppliers);
- List of inspection facilities (for factory inspection)
- …
GTG Group assists clients through every step of the PSE testing process. Remplissez notre court formulaire et commencez à profiter de notre expertise approfondie du secteur et de nos connaissances techniques approfondies pour accélérer le processus dès aujourd’hui !
The requirements for the test samples varies depend on the standard applied for and the certification body. If there is CB certification, 5pcs test samples are required, otherwise, 10pcs.
Below are the general application steps for achieving PSE certificate. Have questions or not sure where to start? Please remplissez notre court formulaire, notre expert se fera un plaisir de vous aider davantage.
- Send the technical documents to us for evaluation;
- Émettre un devis : notre ingénieur évaluera la norme applicable, le temps de test requis et le coût ;
- Settle the payment and send the test samples to our laboratory;
- Perform testing;
- A PSE certificate will be issued after on-site factory inspection.
The diamond PSE certificate have different period of validity depending on the product, generally for 3 years, 5 years and 7 years. The round PSE mark is not a certificate and have no period of validity, it is usually self-declared by the factory or a test report issued by a third-party laboratory/certification body.
3. Inspection en usine
The diamond PSE mark: factory inspection is required, no annual audit. There is no factory inspection requirements for the circle PSE certification.
4. Prix et délai
You will never pay for services that you don’t need! GTG Group provides a customized quote which are tailored to each client's needs and budget. Furthermore, you will receive the round PSE mark in 2 weeks while the diamond PSE certification in 4 weeks according to our past experiences. It is much sooner than the average industry time.
Cependant, le coût et le délai de test et de certification varient en fonction de la complexité du produit et des exigences en matière de test. GTG Group propose une consultation gratuite pour évaluer vos besoins et vous fournir des conseils sur la façon de démarrer en matière de conformité. Contactez-nous aujourd'hui par en remplissant notre court formulaire!
5. Pourquoi nous choisir ?
Fondé en 2012, GTG Group est un fournisseur indépendant de services de test et de certification de produits accrédité ISO/IEC 17025 en Chine, fournissant des tests complets et des certifications réglementaires obtenant des services pour une large gamme de produits. Notre objectif est de certifier vos produits et d’assurer leur conformité aux normes réglementaires afin de vous aider à accéder aux marchés mondiaux.
