1. FCC testing & certification
그만큼 Federal Communication Commission (FCC) is the independent agency of the United States government that regulates the radiation standards of electronic devices. Nearly all products emitting radio frequency energy must be tested by FCC listed or accredited lab and certified by the FCC for EMC/Telecom compliance.
GTG Group is an accredited laboratory for FCC testing with extensive experience in radio and wireless approvals for the North American market. Working with a laboratory with deep industry expertise and extensive technical knowledge can help you avoid common mistakes that can delay your certification.
2. FCC mark
3. FCC ID, SDoC, and products covered
Applicable to mobile communications equipment and other products capable of radio communication, such as 2G cell phones, 3G cell phones, 3.5G cell phones, DECT cell phones (1.8GHz, 1.9GHz), Bluetooth devices, tablet computer, wireless keyboard, wireless microphones, remote controls, walkie-talkies, and other low powered wireless devices.
Not sure if your product requires FCC ID? Please 간단한 양식을 작성해 주세요, 당사 전문가가 기꺼이 추가 지원을 해드릴 것입니다.
For general electronic products without wireless function, such as monitors, lamps, power supplies, home appliances…
Not sure if your product requires FCC SDoC? Please 간단한 양식을 작성해 주세요, 당사 전문가가 기꺼이 추가 지원을 해드릴 것입니다.
It’s important to note that the list above is not exhaustive, and the requirement for FCC certification can vary based on the specific features and capabilities of a device. If a device emits radio frequency radiation or uses wireless technology, it’s advisable for manufacturers or importers to consult with the FCC or a qualified testing laboratory to determine whether FCC certification is necessary for their particular product.
GTG Group’s testing laboratories are FCC-recognized, and our team is always available for any general inquiries, or technical discussions regarding compliance testing/certification. Speak to a GTG Group expert by 간단한 양식 작성 오늘!
4. More about FCC certification
FCC ID:
- Conducted Spurious Emissions
- Radiated Spurious Testing
- Conducted Emissions Band Edge Compliance
- Maximum Peak Conducted Output Power
- 20dB Bandwidth, 99% Occupied Bandwidth and Carrier Frequency Separation
- Channel Spacing
- Number of Hop Channels
- Time of Occupancy (Dwell Time)
- Antenna Testing Requirements
- …
FCC SDoC:
- Conducted Emissions (CE)
- Radiated Emissions (RE)
- …
Below is a list of EMC testing standards we’re capable of. And our team is always available for any general inquiries, or technical discussions regarding the following EMC testing standards. Not sure which standard applies to your product? Please 간단한 양식을 작성해 주세요, 당사 전문가가 기꺼이 추가 지원을 해드릴 것입니다.
North America Standards (United States & Canada):
- General Standards: FCC Part 15B; ICES-003;
- ITE (Information Technology Equipment), Audiovisual (AV) Products: FCC Part 15B;
- Wireless Devices: FCC Part 15C/15E; FCC Part 22/24/27;
- Lighting Products: FCC Part 15B; FCC Part 18; ICES-005;
- Energy Storage Products: FCC Part 15B;
- Household Appliances: FCC Part 15B;
- Industrial, Scientific and Medical Products: FCC Part 18; ICES-001.
CISPR/IEC 표준:
- 일반 표준: IEC 61000-6-1; IEC 61000-6-2; IEC 61000-6-3; IEC 61000-6-4;
- ITE, AV 제품: CISPR 32; CISPR 35; IEC 61000-3-2; IEC 61000-3-3;
- 조명 제품: CISPR 15; IEC 61547; IEC 61000-3-2; IEC 61000-3-3;
- 가전제품: CISPR 14.1; CISPR 14.2; IEC 61000-3-2; IEC 61000-3-3;
- Industrial, Scientific and Medical Products: CISPR 11; IEC 61000-3-2; IEC 61000-3-3; IEC 61000-4 Series.
GTG Group assists clients through every step of the EMC testing process. 간단한 양식을 작성하세요 지금부터 당사의 심층적인 업계 전문 지식과 광범위한 기술 지식을 활용하여 프로세스를 가속화하십시오!
필요한 서류는 제품에 따라 다릅니다. 특정 제품에 대한 자세한 필수 문서를 원하시면 간단한 양식을 작성해 주세요, our expert will be glad to assist you further. Below are some of typical documentation required for FCC ID and FCC SDoC:
FCC ID:
(1) The responsible party (manufacturer or importer) shall test the product in a FCC-approved accredited test lab and obtain a test report.
(2) Fill out the TCB Form 731 according to test results.
(3) In addition to the above, the responsible party is also required to provide relevant documentation and information about product, including:
- Technical document
- Schematics
- 사용 설명서
- FCC confidentiality agreement, authorization letter
- Product nameplate
- …
FCC SDoC:
(1) The responsible party of the product (manufacturer or importer) shall test the product in a testing facility and obtain a test report.
(2) Once the product passed the tests, affix corresponding labels and warnings on the product, and declare in the user manual that it complies with the FCC standard.
(3) Provide U.S. local supplier declaration of conformity documents
GTG Group assists clients through every step of the FCC testing process. 간단한 양식을 작성하세요 지금부터 당사의 심층적인 업계 전문 지식과 광범위한 기술 지식을 활용하여 프로세스를 가속화하십시오!
- One RF fixed-frequency prototype and one ordinary prototype;
- Fixed-frequency prototype are tested with multiple frequency channel product;
- If it is a single frequency channel prototype, please provide a continuous emission one.
5. 가격 및 리드타임
You will never pay for services that you don’t need! GTG Group provides a customized quote which are tailored to each client's needs and budget. Furthermore, you will receive FCC certification within 1 to 2 weeks according to our past experiences.
그러나 테스트 및 인증에 소요되는 비용과 소요 시간은 제품의 복잡성과 테스트 요구 사항에 따라 달라집니다. GTG 그룹은 귀하의 요구 사항을 평가하고 규정 준수를 시작하는 방법에 대한 조언을 제공하기 위한 무료 상담을 제공합니다. 오늘 저희에게 연락주세요 간단한 양식 작성!
6. A2LA accreditation documents
When you choose the GTG Group for testing and certification, you can be confident that you are working with a trusted and reliable partner.
Our laboratory is accredited by A2LA. This means we're authorized to perform FCC testing and write test reports accordingly. Testing scope we specialize in: information technology (IT) products, audiovisual (AV) products, lighting products, small home appliances, power supplies, electric personal transportation vehicles, batteries...
7. Why choose us?
2012년에 설립된 GTG 그룹은 중국의 독립적인 ISO/IEC 17025 공인 제품 테스트 및 인증 서비스 제공업체로서 광범위한 제품에 대한 포괄적인 테스트 및 규제 인증 획득 서비스를 제공합니다. 우리의 목표는 귀사의 제품을 인증하고 규제 표준 준수를 보장하여 귀사가 전 세계 시장에 진출할 수 있도록 돕는 것입니다.