The Korea Electrical Appliance Safety Control Act stipulates that since January 1, 2009, safety certification for electrical products are divided into two types: mandatory certification and voluntary certification:

• Mandatory certification: all electronic products falls under the KC Mark Certification Products List must obtain KC Mark before they can be sold in the Korean market. Factory inspection and product sampling test every two years is required for this type of certification.
• Voluntary certification: all electronic products falls under the Voluntary Certified Products List only need to be tested and obtain the certificate. Factory inspection is not required for this type of certification. The voluntary certificate is valid for 5 years.

Not sure which type of certification is required for your products? Please 간단한 양식을 작성해 주세요, 당사 전문가가 기꺼이 추가 지원을 해드릴 것입니다.

Testing items varies depending on the products. For safety testing items on specific product, please 간단한 양식을 작성해 주세요, our expert will be glad to assist you further. Below are some of typical testing items for KC certification:

• 온도상승시험;
• 절연 저항(IR) 테스트;
• 터치 전류 테스트;
• Ddielectric withstand test;
• 글로우 와이어 테스트;
• 바늘 화염 시험;
• 습도 테스트;
• …

다음은 우리가 수행할 수 있는 안전 테스트 표준 목록입니다. 그리고 우리 팀은 다음과 같은 안전 테스트 표준과 관련된 일반적인 문의 사항이나 기술 토론에 항상 연락할 수 있습니다. 귀하의 제품에 어떤 표준이 적용되는지 잘 모르시나요? 제발 간단한 양식을 작성해 주세요, 당사 전문가가 기꺼이 추가 지원을 해드릴 것입니다.

전원 공급 장치:

• For Information Technology Products: KC 62368-1;
• For Audiovisual (AV) Products: KC 62368-1;
• For Lighting Products: KC 61347-1; KC 61347-2-13;
• For Household Appliances: KC 60335-1; KC 60335-2-29;
• For Industrial Power Supplies (Transformers): KC 61558-1; KC 61558-2-16 (for AC-AC power supplies).

Terminal Products:

• Information Technology Equipment (ITE): KC 62368-1;
• Audiovisual (AV) Products: KC 62368-1;
• Lighting Products: KC 60598-1; KC 60598-2-XX;
• Household Appliances: KC 60335-1; KC 60335-2-XX;
• Industrial Power Supplies (Transformers): KC 61558-1; KC 61558-2-XX;
• Medical Equipment: KC 60601-1;
• Electric Tools: KC 60745-1; KC 60745-2-XX.

배터리 & Personal Mobility Devices: KC 62133-2.

GTG 그룹은 테스트 프로세스의 모든 단계에서 고객을 지원합니다. 간단한 양식을 작성하세요 지금부터 당사의 심층적인 업계 전문 지식과 광범위한 기술 지식을 활용하여 프로세스를 가속화하십시오!

필요한 서류는 제품에 따라 다릅니다. 특정 제품에 대한 자세한 필수 문서를 원하시면 간단한 양식을 작성해 주세요, 당사 전문가가 추가로 도움을 드릴 것입니다. 다음은 전원 공급 장치에 필요한 일반적인 문서 중 일부입니다.

• 신청서;
• 상표;
• User manual in korean;
• Parts list;
• Derivative model list and comparison table;
• Circuit diagram and PCB layout;
• Parts certificate;
• Transformer and inductor specification;
• CB certificate and test report (if any);
• Material list of plug pins for direct plug DC power supply;
• …

Below are the general application steps for achieving KC certificate. Have questions or not sure where to start? Please 간단한 양식을 작성해 주세요, 당사 전문가가 기꺼이 추가 지원을 해드릴 것입니다.

• Provide company information and product technical documentation for reviewing;
• Send the test sample(s) to our laboratory for pre-testing;
• Send the test sample(s) to testing agencies for final testing;
• Factory audit (mandatory certification requires factory inspection);
• Issue test report and KC certificate after approval.

KC certification (mandatory) is valid for 2 years from the date of annual inspection while self-discipline certification (voluntary) is subject to valid.

• Applicant, product and model name should keep the same when using CB test report and certificate. The test standard applied should also corresponds to the KC standard and must be valid within 3 years;
• South Korea’s voltage and frequency: single-phase 110V, 220V~, 3-phase 220V, 380V, 60Hz or 50/60Hz. (Not applicable for 230V 50Hz or 220V 50Hz);
• The plug and power cord used for the product should comply with Korea regulations.