1. SAA certification
SAA stands for "Standards Australia Approvals," which is an Australian certification mark indicating that a product has been tested and verified to meet certain safety and quality standards. It is commonly associated with electrical and electronic products, ensuring that they comply with the regulations set by the Australian authorities. SAA certificates are accepted in all of Australia and New Zealand.
2. SAA certification mark
3. More about SAA certification
Below are some of typical products we specialize in. Itโs important to note that the list below is not exhaustive. Not sure if your product requires SAA certification? Please ๊ฐ๋จํ ์์์ ์์ฑํด ์ฃผ์ธ์, ๋น์ฌ ์ ๋ฌธ๊ฐ๊ฐ ๊ธฐ๊บผ์ด ์ถ๊ฐ ์ง์์ ํด๋๋ฆด ๊ฒ์ ๋๋ค.
- Appliance Coupler;
- Bayonet Lamp Holder;
- Bayonet Lamp Holder Adapter;
- Drag Line Board;
- Screw Socket;
- Miniature Circuit Breaker;
- Power Adapter/Charger;
- Power Plug/Outlet;
- Power Cord;
- Wall Switch;
- Leakage Current Device;
- TV Receiver;
- Massage Equipment;
- Clothes Dryer;
- Washing Machine;
- Water Bed Heater;
- Storage Water Heater;
- Electric Heating Pad;
- Electric Blanket;
- Small Kitchen Appliances;
- Electric Stove;
- Dishwasher;
- Electric Fan;
- Vacuum Cleaner;
- Refrigerator/Freezer;
- Liquid Heater;
- Range Hood;
- Electric Stove;
- Microwave Oven;
- Toaster;
- Portable Cooker;
- Fluorescent Lamp Ballast;
- Fluorescent Light Starter;
- Hair Dryer;
- Hair Appliances;
- Handheld Lamp;
- Portable Lamp;
- Handheld Searchlight;
- Therapeutic Lamps;
- LED Module;
- ์์ฌ๊ธฐ;
- Electric Welding Machine
- Electric Fence Exciter;
- Floor Polishing Machine;
- Floor Scrubbing Machine;
- Pruning Shears;
- Electric Insect Killer or Electrocution Trap;
- Lawn Mowers;
- Sewing Machine;
- Immersion Heater;
- Electric Shaver;
- Electric Hair Clipper;
- Room Heater;
- Portable Power Tools;
- Electric Iron;
- …
๋ค์์ ์ฐ๋ฆฌ๊ฐ ์ํํ ์ ์๋ ์์ ํ ์คํธ ํ์ค ๋ชฉ๋ก์ ๋๋ค. ๊ทธ๋ฆฌ๊ณ ์ฐ๋ฆฌ ํ์ ๋ค์๊ณผ ๊ฐ์ ์์ ํ ์คํธ ํ์ค๊ณผ ๊ด๋ จ๋ ์ผ๋ฐ์ ์ธ ๋ฌธ์ ์ฌํญ์ด๋ ๊ธฐ์ ํ ๋ก ์ ํญ์ ์ฐ๋ฝํ ์ ์์ต๋๋ค. ๊ทํ์ ์ ํ์ ์ด๋ค ํ์ค์ด ์ ์ฉ๋๋์ง ์ ๋ชจ๋ฅด์๋์? ์ ๋ฐ ๊ฐ๋จํ ์์์ ์์ฑํด ์ฃผ์ธ์, ๋น์ฌ ์ ๋ฌธ๊ฐ๊ฐ ๊ธฐ๊บผ์ด ์ถ๊ฐ ์ง์์ ํด๋๋ฆด ๊ฒ์ ๋๋ค.
์ ์ ๊ณต๊ธ ์ฅ์น:
- For Information Technology Equipment (ITE) & Audiovisual (AV) Products: AS/NZS 62368.1;
- For Lighting Products: AS/NZS 61347.1; AS/NZS 61347.2.13;
- For Household Appliances: AS/NZS 60335.1; AS/NZS 60335.2.29;
- For Medical Products: AS/NZS 60601;
- Industrial Power Supplies (Transformer): AS/NZS 61558.1; AS/NZS 61558.2.16.
ํฐ๋ฏธ๋ ์ ํ:
- ITE & AV Products: AS/NZS 62368.1;
- Lighting Products: AS/NZS 60598.1; AS/NZS 60598.2.XX;
- Household Appliances: AS/NZS 60335.1; AS/NZS 60335.2.XX;
- Medical Products: AS/NZS 60601.1;
- Industrial Power Supplies (Transformer): AS/NZS 61558.1; AS/NZS 61558.2.XX;
- Electric Tools: AS/NZS 60745.1; AS/NZS 60745.2.XX.
๋ฐฐํฐ๋ฆฌ:
- Batteries for Consumer Electronics: IEC 62133; IEC 60086; IEC 61960;
- Power Batteries: IEC 62660-1; IEC 62660-2; IEC 62660-3; IEC 62619; IEC 62620.
PLEV & EPAC ์์ ๊ฑฐ:
- ๊ฐ์ธ์ฉ ๊ฒฝ์ ๊ธฐ์ฐจ(PLEV) & ์ ๋ ฅ ๋ณด์กฐ ์์ ๊ฑฐ(EPAC ์์ ๊ฑฐ): IEC 15194; IEC 17128.
GTG ๊ทธ๋ฃน์ ํ ์คํธ ํ๋ก์ธ์ค์ ๋ชจ๋ ๋จ๊ณ์์ ๊ณ ๊ฐ์ ์ง์ํฉ๋๋ค. ๊ฐ๋จํ ์์์ ์์ฑํ์ธ์ ์ง๊ธ๋ถํฐ ๋น์ฌ์ ์ฌ์ธต์ ์ธ ์ ๊ณ ์ ๋ฌธ ์ง์๊ณผ ๊ด๋ฒ์ํ ๊ธฐ์ ์ง์์ ํ์ฉํ์ฌ ํ๋ก์ธ์ค๋ฅผ ๊ฐ์ํํ์ญ์์ค!
ํ์ํ ์๋ฅ๋ ์ ํ์ ๋ฐ๋ผ ๋ค๋ฆ ๋๋ค. ํน์ ์ ํ์ ๋ํ ์์ธํ ํ์ ๋ฌธ์๋ฅผ ์ํ์๋ฉด ๊ฐ๋จํ ์์์ ์์ฑํด ์ฃผ์ธ์, our expert will be glad to assist you further. Below are some of typical required documentation for METI filing:
- Application Form;
- CB Certificate and Test Report;
- Product Label;
- Block Diagram;
- PCB Layout;
- User Manual;
- ๊ตฌ์ฑ ๋ฐ์ดํฐ ์์(CDF);
- Bill of Materials (BOM);
- Difference List;
- …
Below are the general filing steps for METI filing. Have questions or not sure where to start? Please ๊ฐ๋จํ ์์์ ์์ฑํด ์ฃผ์ธ์, ๋น์ฌ ์ ๋ฌธ๊ฐ๊ฐ ๊ธฐ๊บผ์ด ์ถ๊ฐ ์ง์์ ํด๋๋ฆด ๊ฒ์ ๋๋ค.
- ์ ์ฒญ์๋ฅผ ์์ฑํ์ธ์.
- Perform test;
- Make improvements on the test sample if the test fails;
- ํ ์คํธ ๋ณด๊ณ ์๋ฅผ ๋ฐํํ์ญ์์ค.
- Report evaluation;
- Issue the certificate.
The SAA certification is valid for 5 years.
4. ๊ณต์ฅ๊ฒ์ฌ
There are two types of SAA certification marks: formal certification mark ๊ทธ๋ฆฌ๊ณ standard mark. Formal certification mark is only responsible for the sample while the standard mark require factory inspection.
5. ๊ฐ๊ฒฉ ๋ฐ ๋ฆฌ๋ํ์
You will never pay for services that you donโt need! GTG Group provides a customized quote which are tailored to each client's needs and budget. Furthermore, you will receive the SAA certification within 3 to 4 weeks according to our past experience, much shorter than the average industry time..
๊ทธ๋ฌ๋ ํ
์คํธ ๋ฐ ์ธ์ฆ์ ์์๋๋ ๋น์ฉ๊ณผ ์์ ์๊ฐ์ ์ ํ์ ๋ณต์ก์ฑ๊ณผ ํ
์คํธ ์๊ตฌ ์ฌํญ์ ๋ฐ๋ผ ๋ฌ๋ผ์ง๋๋ค. GTG ๊ทธ๋ฃน์ ๊ทํ์ ์๊ตฌ ์ฌํญ์ ํ๊ฐํ๊ณ ๊ท์ ์ค์๋ฅผ ์์ํ๋ ๋ฐฉ๋ฒ์ ๋ํ ์กฐ์ธ์ ์ ๊ณตํ๊ธฐ ์ํ ๋ฌด๋ฃ ์๋ด์ ์ ๊ณตํฉ๋๋ค. ์ค๋ ์ ํฌ์๊ฒ ์ฐ๋ฝ์ฃผ์ธ์ ๊ฐ๋จํ ์์ ์์ฑ!
6. ์ ์ฐ๋ฆฌ๋ฅผ ์ ํํฉ๋๊น?
2012๋ ์ ์ค๋ฆฝ๋ GTG ๊ทธ๋ฃน์ ์ค๊ตญ์ ๋ ๋ฆฝ์ ์ธ ISO/IEC 17025 ๊ณต์ธ ์ ํ ํ ์คํธ ๋ฐ ์ธ์ฆ ์๋น์ค ์ ๊ณต์ ์ฒด๋ก์ ๊ด๋ฒ์ํ ์ ํ์ ๋ํ ํฌ๊ด์ ์ธ ํ ์คํธ ๋ฐ ๊ท์ ์ธ์ฆ ํ๋ ์๋น์ค๋ฅผ ์ ๊ณตํฉ๋๋ค. ์ฐ๋ฆฌ์ ๋ชฉํ๋ ๊ท์ฌ์ ์ ํ์ ์ธ์ฆํ๊ณ ๊ท์ ํ์ค ์ค์๋ฅผ ๋ณด์ฅํ์ฌ ๊ท์ฌ๊ฐ ์ ์ธ๊ณ ์์ฅ์ ์ง์ถํ ์ ์๋๋ก ๋๋ ๊ฒ์ ๋๋ค.