1. GS mark
The GS mark stands for "Geprüfte Sicherheit," which translates to "tested safety" in English. The mark is recognized throughout Europe and is a symbol of quality and safety. The GS mark is not mandatory in Germany, but it is highly recommended. Many German manufacturers choose to have their products certified with the GS mark as a way of demonstrating their commitment to quality and safety. In addition, some retailers may require products to have the GS mark before they will stock them.
2. More about GS mark
Household appliances, household electronic equipment, luminaires, audio-visual equipment, office electrical and electronic equipment, and other safety-related products.
Not sure if your product requires GS mark? Please 간단한 양식을 작성해 주세요, 당사 전문가가 기꺼이 추가 지원을 해드릴 것입니다.
테스트 항목은 제품에 따라 다릅니다. 특정 제품에 대한 안전성 테스트 항목을 확인하시기 바랍니다. 간단한 양식을 작성해 주세요, our expert will be glad to assist you further. Below are some of typical testing items for GS mark:
- Working voltage;
- 결함 테스트;
- 충격시험;
- 진동 테스트;
- 충격시험;
- 가연성 테스트;
- Plug test;
- Protection connection conductor resistance;
- Power cord stress relief test;
- Electrical connection and fixed connection test;
- Leakage test;
- Accessibility test;
- Energy hazard check;
- 제한된 전원(LPS) 테스트;
- Safety interlock device test
- Printed circuit board test;
- Power supply protective cover;
- Encapsulation and sealing parts test;
- Resistance to external force test;
- Electrical equipment in (on) buildings;
- Electric shock test;
- Dielectric strength test;
- Labeling inspection and test;
- Radiation test;
- Temperature rise Test;
- SELV test;
- TNV test;
- Limited current circuit (LCC) test;
- Overload Test;
- Manual device test;
- Battery explosion proof test;
- Overflow test;
- Electrical clearance, creepage distance and insulation penetration distance;
- External wire terminals;
- …
Below is a list of safety & EMC testing standards we’re capable of. And our team is always available for any general inquiries, or technical discussions regarding the following safety & EMC testing standards. Not sure which standard apply to your product? Please 간단한 양식을 작성해 주세요, 당사 전문가가 기꺼이 추가 지원을 해드릴 것입니다.
- Information Technology (IT) & Audiovisual (AV) Products and Power Supplies for IT/AV Products: EN 62368-1; EN 60335-1; EN 60335-2-29; EN 55032; EN 55035; EN 61000-3-2; EN 61000-3-3;
- 무선 제품: EN 62368-1; ETSI EN 300220; ETSI EN 300440; ETSI EN 300328; ETSI EN 301357; ETSI EN 301511; ETSI EN 301489;
- Household Appliance: EN 60335-1; EN 60335-2-29; EN 60335-XX; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3;
- 의료 제품: EN 60601-1; EN 55011; EN 61000-6-2; EN 61000-3-2; EN 61000-3-3;
- LED Bulb Light: EN 62560:2012+A1:2015; EN 62493:2015; EN 62471:2008; IEC/TR 62778:2014;
- Self-ballasted Fluorescent Lamps: EN 60968:2015; EN 62493:2015; EN 62471:2008;
- Fixed Luminaires: EN 60598-1:2015; EN 60598-2-1:1989; EN 62471:2008; IEC/TR 62778:2014; EN 62493:2015;
- Recessed Luminaires: EN 60598-1:2015; EN 60598-2-2:2012; EN 62471:2008; IEC/TR 62778:2014; EN 62493:2015;
- Streetlights and Streetlamps: EN 60598-1:2015; EN 60598-2-3:2003+A1:2011; EN 62471:2008; IEC/TR 62778:2014; EN 62493:2015;
- 투광 조명: EN 60598-1:2015; EN 60598-2-5:2015; EN 62471:2008; IEC/TR 62778:2014; EN 62493:2015;
- LED Driver: EN 61347-2-13:2014; EN 61347-1:2015; EN 62493:2015.
GTG 그룹은 테스트 프로세스의 모든 단계에서 고객을 지원합니다. 간단한 양식을 작성하세요 지금부터 당사의 심층적인 업계 전문 지식과 광범위한 기술 지식을 활용하여 프로세스를 가속화하십시오!
필요한 서류는 제품에 따라 다릅니다. 특정 제품에 대한 자세한 필수 문서를 원하시면 간단한 양식을 작성해 주세요, 당사 전문가가 추가로 도움을 드릴 것입니다. 다음은 전원 공급 장치에 필요한 일반적인 문서 중 일부입니다.
- 신청서;
- Documentation required for safety assessment: user manuals, parts lists, circuit diagrams, layout, structural drawings, specifications of parts (transformer…);
- CB certificate and test report of the product (if available);
- Food contact parts (if any)
- Nameplate in German (correct size GS logo required);
- EMC assessment report factory declaration of conformity (DOC);
- Instruction manual in German;
- Shipment samples for structural reviewing, type approval testing or ergonomic assessment;
- Assessment reports for Noise and EN50332, if applicable;
- Assessment reports for DMF, EMF, if applicable.
Below are the general application steps for achieving GS certificate. Have questions or not sure where to start? Please 간단한 양식을 작성해 주세요, 당사 전문가가 기꺼이 추가 지원을 해드릴 것입니다.
- Initial meeting: at the meeting, the testing agency will explain to the applicant’s product engineer(s) the specific procedures for certification and the relevant standards, and provide application forms;
- Submit documentation required: the applicant shall all the documentation required to the testing agency, including submit general assembly diagrams, electrical schematics, bill of materials, product use or installation instructions, explanation of model differences;
- Technical meeting: after the testing agency has reviewed the applicant’s documentation, a technical meeting will be arranged with the applicant’s technical engineer(s);
- Sample test: the test will be carried out in accordance with the applicable standards, either in the manufacturer’s laboratory or the testing laboratories in any of the countries;
- Factory inspection: GS certificate requires inspection of safety-related procedures at the production site;
- A GS certificate will be issued after all the procedures have done.
GS certificate is valid for 5 years from the date of issue, and the factory will be reviewed once a year during the validity period. 5 years later, you will need to re-test the product to obtain GS certificate.
4. 공장검사
Factory inspection is required before issuing GS certificate:
- Quality management;
- Production line of the products to be certified;
- Raw materials, purchased parts, components and parts;
- Measurement;
- Factory test facility;
- Technical documentation;
- Technical services.
5. 가격 및 리드타임
You will never pay for services that you don’t need! GTG Group provides a customized quote which are tailored to each client's needs and budget. Furthermore, we can expedite the certification process by leveraging modern technologies that ensure you receive the GS certificate in a reasonably short time frame, faster than the average industry time.
그러나 테스트 및 인증에 소요되는 비용과 소요 시간은 제품의 복잡성과 테스트 요구 사항에 따라 달라집니다. GTG 그룹은 귀하의 요구 사항을 평가하고 규정 준수를 시작하는 방법에 대한 조언을 제공하기 위한 무료 상담을 제공합니다. 오늘 저희에게 연락주세요 간단한 양식 작성!
6. 왜 우리를 선택합니까?
2012년에 설립된 GTG 그룹은 중국의 독립적인 ISO/IEC 17025 공인 제품 테스트 및 인증 서비스 제공업체로서 광범위한 제품에 대한 포괄적인 테스트 및 규제 인증 획득 서비스를 제공합니다. 우리의 목표는 귀사의 제품을 인증하고 규제 표준 준수를 보장하여 귀사가 전 세계 시장에 진출할 수 있도록 돕는 것입니다.
