BIS will issue the certificate only after the initial inspection and evaluation of factory quality management system and sample inspection are confirmed to be satisfactory. The certification is supervised by the factory’s quality management system after completion of the certification. BIS will test samples taken from factories and markets to determine if products comply with Indian standards.

Testing items varies depending on the products. For safety testing items on specific product, please हमारा संक्षिप्त फॉर्म भरें, our expert will be glad to assist you further. Below are some of typical testing items for power supplies:

• Temperature rise test;
• Dielectric withstand test;
• Fault test;
• Insulation resistance (IR) test;
• Creepage distance and clearances
• …

Below is a list of safety testing standards we’re capable of. And our team is always available for any general inquiries, or technical discussions regarding the following safety testing standards. Not sure which standard apply to your product? Please हमारा संक्षिप्त फॉर्म भरें, हमारे विशेषज्ञ आगे सहायता करने में प्रसन्न होंगे।

• Information technology (IT) products: IS 13252 (Part 1):2010;
• Audiovisual products: IS 616:2010.

जीटीजी ग्रुप परीक्षण प्रक्रिया के हर चरण में ग्राहकों की सहायता करता है। हमारा संक्षिप्त फॉर्म भरें और प्रक्रिया में तेजी लाने में मदद के लिए आज ही हमारी गहरी उद्योग विशेषज्ञता और व्यापक तकनीकी ज्ञान का लाभ लेना शुरू करें!

Required documentation varies depending on the products. For detailed required documentation on specific product, please हमारा संक्षिप्त फॉर्म भरें, our expert will be glad to assist you further. Below are some of typical required documentation for BIS certification:

• Application form;
• Appointment form proving local agent in India or documents proving the presence of the manufacturer’s office in India and a letter of authorization from the Reserve Bank of India;
• Rregistration certificate of the company;
• Process flow diagram showing the entire manufacturing process of the product (from raw material to finished product);
• Quality control system, including quality manual, quality control plan, test plan;
• Provide additional details of the product or system certification (if available);
• Details of components or raw materials used in the manufacture of the product (if available);
• List of manufacturing machines;
• List of testing equipment;
• Product design drawings;
• Details of qualifications and experience of laboratory supervisors, technician and QC staff;
• Test reports from accredited independent laboratories or the factory’s own laboratories;
• Layout of the factory showing clearly the main manufacturing machines and laboratories;
• Traffic diagrams from the nearest airport or railway station to the factory and the detailed transportation route from India to the factory;
• Bill of exchange;
• …

Below are the general application steps for achieving BIS certificate. Have questions or not sure where to start? Please हमारा संक्षिप्त फॉर्म भरें, हमारे विशेषज्ञ आगे सहायता करने में प्रसन्न होंगे।

• Fill out the application form. Foreign manufacturers are generally required to use a dedicated application form and prepare the relevant documentation to apply to BIS headquarters in New Delhi.
• Review. BIS will review the application documents submitted by the applicant and record the application if it is complete. The applicant shall pay the corresponding processing fee.
• Initial factory inspection: BIS will send a team of not more than 2 officials to inspect the factory. The applicant shall bear the travel and visa expenses of the officials to the factory and the corresponding inspection fees.
• Issue the certificate. A certificate will be issued to the applicant if the initial inspection and test results are satisfactory and the applicant agrees to perform a BIS approved inspection and testing program and pay the BIS logo fee. The certificate is valid for 1 year and the holder shall pay for the logo and the certificate annually.
• Post-certification supervision. BIS supervises the quality of its certified products through regular supervision of the holder and unannounced inspections and testing of samples from factories and markets. The certificate may be renewed if the test samples taken from the factory or market by the regular inspections meet the requirements by the inspection and independent testing results of that factory. The renewal fee is Rs. 500 for renewal of the certificate by submitting the dedicated form to the BIS. The holder of the certificate shall also bear the cost of sample inspection.

• BIS certification is generally valid for one year, and applicants must pay an annual fee for renewal. An extension may be applied for before the expiration date, at this time you need to submit an extension application and pay the application fee and annual fee;
• BIS accepts CB test reports issued by valid certification bodies;
• Certification processes will be faster if the applicant meets the following conditions:
  • Fill in the manufacturing plan in the factory address line in the application form;
  • The factory has all test equipment conforming to relevant Indian standards;
  • Product is certified to meet relevant Indian standards (tested in own laboratory or other independent laboratory according to India standards and submitted with test report).