Household appliances, household electronic equipment, luminaires, audio-visual equipment, office electrical and electronic equipment, and other safety-related products.

Not sure if your product requires GS mark? Please हमारा संक्षिप्त फॉर्म भरें, हमारे विशेषज्ञ आगे सहायता करने में प्रसन्न होंगे।

Testing items varies depending on the products. For safety testing items on specific product, please हमारा संक्षिप्त फॉर्म भरें, our expert will be glad to assist you further. Below are some of typical testing items for GS mark:

• Working voltage;
• Fault test;
• Impact test;
• Vibration test;
• शॉक परीक्षण;
• Flammability test;
• Plug test;
• Protection connection conductor resistance;
• Power cord stress relief test;
• Electrical connection and fixed connection test;
• Leakage test;
• Accessibility test;
• Energy hazard check;
• सीमित शक्ति स्रोत (एलपीएस) परीक्षण;
• Safety interlock device test
• Printed circuit board test;
• Power supply protective cover;
• Encapsulation and sealing parts test;
• Resistance to external force test;
• Electrical equipment in (on) buildings;
• Electric shock test;
• Dielectric strength test;
• Labeling inspection and test;
• Radiation test;
• Temperature rise Test;
• SELV test;
• TNV test;
• सीमित वर्तमान सर्किट (एलसीसी) परीक्षण;
• Overload Test;
• Manual device test;
• Battery explosion proof test;
• Overflow test;
• Electrical clearance, creepage distance and insulation penetration distance;
• External wire terminals;
• …

Below is a list of safety & EMC testing standards we’re capable of. And our team is always available for any general inquiries, or technical discussions regarding the following safety & EMC testing standards. Not sure which standard apply to your product? Please हमारा संक्षिप्त फॉर्म भरें, हमारे विशेषज्ञ आगे सहायता करने में प्रसन्न होंगे।

• Information Technology (IT) & Audiovisual (AV) Products and Power Supplies for IT/AV Products: EN 62368-1; EN 60335-1; EN 60335-2-29; EN 55032; EN 55035; EN 61000-3-2; EN 61000-3-3;
• Wireless Products: EN 62368-1; ETSI EN 300220; ETSI EN 300440; ETSI EN 300328; ETSI EN 301357; ETSI EN 301511; ETSI EN 301489;
• Household Appliance: EN 60335-1; EN 60335-2-29; EN 60335-XX; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3;
• Medical Products: EN 60601-1; EN 55011; EN 61000-6-2; EN 61000-3-2; EN 61000-3-3;
• LED Bulb Light: EN 62560:2012+A1:2015; EN 62493:2015; EN 62471:2008; IEC/TR 62778:2014;
• Self-ballasted Fluorescent Lamps: EN 60968:2015; EN 62493:2015; EN 62471:2008;
• Fixed Luminaires: EN 60598-1:2015; EN 60598-2-1:1989; EN 62471:2008; IEC/TR 62778:2014; EN 62493:2015;
• Recessed Luminaires: EN 60598-1:2015; EN 60598-2-2:2012; EN 62471:2008; IEC/TR 62778:2014; EN 62493:2015;
• Streetlights and Streetlamps: EN 60598-1:2015; EN 60598-2-3:2003+A1:2011; EN 62471:2008; IEC/TR 62778:2014; EN 62493:2015;
• Floodlights: EN 60598-1:2015; EN 60598-2-5:2015; EN 62471:2008; IEC/TR 62778:2014; EN 62493:2015;
• LED Driver: EN 61347-2-13:2014; EN 61347-1:2015; EN 62493:2015.

जीटीजी ग्रुप परीक्षण प्रक्रिया के हर चरण में ग्राहकों की सहायता करता है। हमारा संक्षिप्त फॉर्म भरें और प्रक्रिया में तेजी लाने में मदद के लिए आज ही हमारी गहरी उद्योग विशेषज्ञता और व्यापक तकनीकी ज्ञान का लाभ लेना शुरू करें!

Required documentation varies depending on the products. For detailed required documentation on specific product, please हमारा संक्षिप्त फॉर्म भरें, our expert will be glad to assist you further. Below are some of typical required documentation for power supplies:

• आवेदन फार्म;
• Documentation required for safety assessment: user manuals, parts lists, circuit diagrams, layout, structural drawings, specifications of parts (transformer…);
• CB certificate and test report of the product (if available);
• Food contact parts (if any)
• Nameplate in German (correct size GS logo required);
• EMC assessment report factory declaration of conformity (DOC);
• Instruction manual in German;
• Shipment samples for structural reviewing, type approval testing or ergonomic assessment;
• Assessment reports for Noise and EN50332, if applicable;
• Assessment reports for DMF, EMF, if applicable.

Below are the general application steps for achieving GS certificate. Have questions or not sure where to start? Please हमारा संक्षिप्त फॉर्म भरें, हमारे विशेषज्ञ आगे सहायता करने में प्रसन्न होंगे।

• Initial meeting: at the meeting, the testing agency will explain to the applicant’s product engineer(s) the specific procedures for certification and the relevant standards, and provide application forms;
• Submit documentation required: the applicant shall all the documentation required to the testing agency, including submit general assembly diagrams, electrical schematics, bill of materials, product use or installation instructions, explanation of model differences;
• Technical meeting: after the testing agency has reviewed the applicant’s documentation, a technical meeting will be arranged with the applicant’s technical engineer(s);
• Sample test: the test will be carried out in accordance with the applicable standards, either in the manufacturer’s laboratory or the testing laboratories in any of the countries;
• Factory inspection: GS certificate requires inspection of safety-related procedures at the production site;
• A GS certificate will be issued after all the procedures have done.

GS certificate is valid for 5 years from the date of issue, and the factory will be reviewed once a year during the validity period. 5 years later, you will need to re-test the product to obtain GS certificate.