1. ANATEL certification
Established in 1997, ANATEL is responsible for approving telecommunication products to meet quality and safety standards and regulations. Almost all products that transmit radio frequencies or connect to the public telephone network and telephony powered by lithium batteries must be approved by the regulatory agency.
2. ANATEL certification mark
3. More about ANATAL certification
ANATEL certification is mandatory for three categories of telecommunication equipment:
Category I
1. terminal equipment that connects to a Fixed Switching Telephone Service (FSTS) network via an endpoint;
2. equipment that connects a private telecommunications network to an FSTS network;
3. equipment that connects to the FSTS network for the purpose of providing value-added services.
Product examples: cell phones, satellite phones, VOIP phones, cellular phone batteries, cellular phone charging cables, telephone signal cables, modems…
Category II
Any equipment using radio not covered by Type I, such as low-voltage devices, unlicensed equipment and antennas.
Product examples: TV and radio antennas, receivers, transmitters, wireless network equipment, RF automation equipment…
Category III
Any equipment not covered by Type I or II that is subject to ANATEL’s rules and regulations.
Product examples: fiber optic cables, cable connectors, mobile network signal transmitters…
Not sure if your product requires ANATEL certificate? Please हमारा संक्षिप्त फॉर्म भरें, हमारे विशेषज्ञ आगे सहायता करने में प्रसन्न होंगे।
Required documentation varies depending on the products. For detailed required materials on specific product, please हमारा संक्षिप्त फॉर्म भरें, our expert will be glad to assist you further. Below are some of typical required documentation for ANATEL certificate:
- Information of the applicant (the applicant should be a local company in Brazil. GTG Group can assign a local representative.);
- ISO 9001 certificate;
- User manual in Portuguese;
- Technical specifications;
- आवेदन फार्म;
- Nameplate;
- Frequency setting software;
- …
Below are the general application steps for achieving ANATEL certificate. Have questions or not sure where to start? Please हमारा संक्षिप्त फॉर्म भरें, हमारे विशेषज्ञ आगे सहायता करने में प्रसन्न होंगे।
- Engineer evaluating the applicable regulations and the required tests for the product;
- Sending the requested test sample(s) to our laboratory for pre-compliance testing (EMC & RF);
- Made improvements if the test sample(s) fail the pre-testing and prepare for the retest;
- Sending test sample(s) to to the local laboratory in Brazil if pre-testing have all past;
- Brazil local testing laboratory test the sample(s) and issue a test report;
- Organismo de Certificação Designado (OCD) issues a CoC certificate;
- OCD submits the CoC certificate and the test report to Aantel for Certificate of Homologation (CoH);
- Anatel reviewing the documentation and issues the CoH certificate;
- GTG Group sending back the test report, CoC, CoH certificate.
- 2 years for Category I equipment;
- 2 years for Category II equipment;
- 3 years for Category III equipment.
- All products listed on ANATEL’s published list must be certified;
- Certificate/authorization holder (the importer or the manufacturer) need to be legally recognized by Brazil;
- User manuals, installation instructions and warning signs are required in Portugal. Other documents can be in English;
- The ANATEL certification mark must be added on products exporting to Brazil.
4। मूल्य और लीड समय
You will never pay for services that you don’t need! GTG Group provides a customized quote which are tailored to each client's needs and budget. Furthermore, you will receive ANATEL certificate in a reasonably short time frame compared with the average industry time.
हालाँकि, परीक्षण और प्रमाणन की लागत और मुख्य समय उत्पाद की जटिलता और परीक्षण आवश्यकताओं के आधार पर भिन्न होता है। जीटीजी समूह आपकी आवश्यकताओं का आकलन करने और अनुपालन के साथ शुरुआत करने के बारे में सलाह देने के लिए निःशुल्क परामर्श प्रदान करता है। आज ही हमसे संपर्क करें हमारा संक्षिप्त फॉर्म भरना!
5। हमें क्यों चुनें?
2012 में स्थापित, जीटीजी ग्रुप चीन में एक स्वतंत्र आईएसओ/आईईसी 17025 मान्यता प्राप्त उत्पाद परीक्षण और प्रमाणन सेवा प्रदाता है, जो उत्पादों की एक विस्तृत श्रृंखला के लिए व्यापक परीक्षण और नियामक प्रमाणन प्राप्त करने वाली सेवाएं प्रदान करता है। हमारा लक्ष्य आपके उत्पादों को प्रमाणित करना और नियामक मानकों के साथ उनका अनुपालन सुनिश्चित करना है ताकि आपको दुनिया भर के बाजारों तक पहुंचने में मदद मिल सके।
