1. RCM mark
The RCM registration mark in Australia and New Zealand indicates that the supplier has declared that their product complies with the safety and other requirements outlined in their respective electrical safety laws/regulations, as well as the electromagnetic compatibility requirements outlined in their respective radio communications acts (the Australian Radio Communications Act and the New Zealand Radio Communications Act).
The statutory governing bodies of the other states are acceptable as long as the supplier is authorized to use the RCM logo in any one state, resulting in the achievement of a state passage that has already been approved by the federal government.
On March 1, 2013, RCM commenced the transition to replace the C-tick and A-tick marks, and the introduction of the new Electrical Equipment Safety System (EESS). The RCM became mandatory as of March 1, 2016.
2. More about RCM mark
Below is the in-scope electrical equipment. Not sure if your product requires RCM? Please заполните нашу короткую форму, наш специалист будет рад помочь в дальнейшем.
- Rated at a voltage greater than 50 VAC and less than 1000 VAC;
- Rated at a voltage greater than 120 VDC and less than 1500 VDC.
The electrical equipment offered for sale is categorised as risk levels of Level 1, 2 or 3:
Level 1 applies to low-risk devices with DC power supply, provide EMC test report to apply for RCM;
Level 2 applies to medium-risk devices with AC power supply, provide EMC and safety test reports to apply for RCM;
Level 3 applies to high-risk devices, provide EMC test report, safety test report and SAA certificate to apply for RCM and register for Electrical Equipment Safety System (EESS).
Требуемая документация варьируется в зависимости от продукта. Для получения подробной документации, необходимой для конкретного продукта, пожалуйста, заполните нашу короткую форму, our expert will be glad to assist you further. Below are some of typical documentation required for RCM mark:
- Application form
- User manual and technical specification;
- Принципиальная схема;
- Component list;
- Difference list;
- Фотографии продукта;
- …
Below are the general application steps for achieving RCM mark. Have questions or not sure where to start? Please заполните нашу короткую форму, наш специалист будет рад помочь в дальнейшем.
- Engineer evaluating the product and applicable standard;
- Send 3PCS test samples to our laboratory;
- Perform test and prepare for the test report;
- Submit the test report to the Australia certification body for compliance audit;
- Issue the RCM certification;
- Register on the EESS database and start using the RCM mark. Registration can be done by the suppliers themselves or by the laboratory.
- You must affix the RCM mark on the product when arrived. This requirement was announced by Australia on April 19, 2013;
- Tubes lights, such as T8 LED tube lights and fluorescent tubes, must be sent to Australia for evaluation as they can be replaced by the user directly which are considered involves an element of risk;
- If the product with a CB certificate and have national differences, then you can choose to turn the CB certificate into safety certificate. Along with the EMC report, you can ask the test agency to issue a supplier declaration. Then the product can be sold to Australia and affix the RCM mark;
- When applying for the safety certificate for a direct plug in power adapter, you will need to perform an AU Plug Test according to AS/NZS 3112:2004;
- EMC report can be either C-Tick Report (test according to AS/NZS CISPR 22:2002) or CE EMC Report.
3. Заводская проверка
Factory inspection is not require.
4. Цена и время выполнения заказа
You will never pay for services that you don’t need! GTG Group provides a customized quote which are tailored to each client's needs and budget. Furthermore, we can expedite the certification process by leveraging modern technologies that ensure you receive the RCM mark in a reasonably short time frame, faster than the average industry time.
Однако стоимость и время проведения испытаний и сертификации варьируются в зависимости от сложности продукта и требований к тестированию. GTG Group предоставляет бесплатную консультацию для оценки ваших потребностей и рекомендаций о том, как начать соблюдение требований. Свяжитесь с нами сегодня по заполнив нашу короткую форму!
5. Почему выбирают нас?
Основанная в 2012 году, GTG Group является независимым поставщиком услуг по тестированию и сертификации продукции в Китае, аккредитованным по стандарту ISO/IEC 17025, который предоставляет комплексные услуги по тестированию и сертификации нормативных требований для широкого спектра продуктов. Наша цель — сертифицировать вашу продукцию и обеспечить ее соответствие нормативным стандартам, чтобы помочь вам получить доступ к мировым рынкам.